KOYO 6204-2RS Bearing delivers smooth rotation, high load support, and dual rubber-sealed durability.
Item Specifics
• Bearing Type: Deep Groove Ball Bearing
• Design: Single Row Radial Ball Bearing
• Seal Type: 2RS (Double Rubber Contact Sealed Both Sides)
• Size: 20 mm Bore x 47 mm Outside Diameter x 14 mm Width (20x47x14 mm)
• Dynamic Load Rating: 16.0 kN
• Static Load Rating: 6.65 kN
• Limiting Speed: 9,700 RPM (Grease Lubrication)
• Lubrication: Factory Pre-Lubricated with High-Performance Grease
• Reference Weight: Approx. 106 g per bearing
Product Description
The authentic KOYO 6204-2RS Bearing is engineered for smooth rotational performance and high operational reliability across industrial machinery and electric motor systems. Featuring precision ground raceways with a single row deep groove configuration, it sustains both dynamic radial loads and bidirectional axial forces with minimal frictional drag, steady thermal dispersion, and consistent running precision.
Equipped with dual contact rubber seals, this KOYO 6204-2RS Bearing retains factory lubricants while locking out airborne dust, moisture, and road contaminants. Built to exacting standard dimensions of 20x47x14 mm, it serves as an ideal drop-in replacement component for automotive alternators, garden machinery, industrial pumps, gearboxes, and power tools requiring dependable mechanical endurance.
Key Features and Benefits
- Factory Pre-Lubricated: Packed with premium grease for immediate installation, quiet operation, and zero initial maintenance.
- Optimized Load Capacity: Built with 16.0 kN dynamic and 6.65 kN static load ratings to support demanding mechanical assemblies.
- Standard Metric Fit: Precision-engineered 20x47x14 mm specifications ensure direct compatibility with equipment requiring standard 6204 sizing.
- High-Speed Precision: Balanced steel elements enable smooth operation with a limiting speed of up to 9,700 RPM.
Construction and Material Components
• Rolling Elements: Hardened spherical steel balls ensure balanced load distribution and low-vibration rotational efficiency.
• Retaining Cage: Pressed steel cage maintains uniform ball spacing and stable alignment under operational stress.
• Contact Seals: Nitrile butadiene rubber (NBR) with embedded steel reinforcement plates provide dependable environmental barriers.
• Internal Lubricant: Mineral-based lithium complex grease ensures continuous protective lubrication.
How to Use
2. Clean and inspect the shaft journal and housing bore to remove dirt, burrs, or foreign particles.
3. Keep the bearing in its protective packaging until installation to avoid contamination.
4. Press the bearing squarely into position using a suitable mechanical bearing driver or arbor press.
5. Apply mounting pressure only to the fitted ring; never transfer force through the rolling balls or rubber seals.
6. Check for smooth, unrestricted manual rotation before returning the machine to service.
Material Composition
High-Carbon Chromium Bearing Steel (SUJ2 / AISI 52100), Precision Steel Balls, Pressed Sheet Steel, Nitrile Butadiene Rubber (NBR) with Steel Insert, Mineral Oil-Based Lithium Grease


